Tap valves are commonly referred to as heads, glands, cartridges and inserts, all of which typically describe the same component.
Before deciding what cartridge to buy you need to keep a few things in mind:
1. The type of Tap you have will determine what cartridge you need.
2. The size of the cartridge, For some Taps we can offer like for like but sometimes alternatives are available if originals are no longer available.
3. Certain cartridges have different spline counts on the thread, make sure yours matches the tap handle so it fits in correctly.
To explore the complete range of valves and cartridges, please click here:
Tap Washer Valves
.png)
The valves are offered in two sizes: 1/2inch and 3/4inch BSP thread sizes. Additionally, all valves feature M24 upper threads, allowing them to fit any type of shroud or cover.
You can view our full range here:
These valves are designed to wind down for opening and closing and so are designed for taps where you wind the handle to get water. They can be fitted to either the hot or cold side as they open in the same direction.
The available sizes for these valves are 3/8", 1/2", and 3/4" BSP thread sizes.
Ceramic Disk Cartridges
These valves are specifically designed for two-handle taps that open but turning the handle left or right. They are available in quarter turn variants. They can be used as replacement basin valves and are typically sold in pairs, with one clockwise and one anti-clockwise opening valve.
If you require replacement cartridges for single lever taps, we offer ceramic disk cartridges.
You can view the full range here:
These cartridges come in various sizes both 1/2Inch and 3/4 Inch with both ½ and ¼ Turn Variants.
Mixer Tap Cartridge
Mixer Tap cartridges are for taps that control mixed water temperature.. These are Available in both Flat Base and Peg Leg Variants.
Which valve do you need?
To determine the appropriate cartridge, you will need to remove your current part and measure its size. Once you have the measurements, you can find the matching size in our range. Alternatively, you can ask our team for help via email at sales@bathroomspareparts.co.uk
An example of the different cartridge measurements
We strongly recommend using silicone grease when servicing your tap, as this facilitates smooth fitting of the parts and helps prevent wear and damage.
We Stock replacement valves and cartridges compatible with a wide range of popular tap brands, including Alpi, Brev, Bristan, Cifial, Crosswater, Dornbracht, Fantini, Gessi, Grohe, Keuco, Hudson Reed, Victoria Plumb, Ideal standard, Ultra, and many others.
When changing a tap valve, always remember to switch off the water supply beforehand, the Cold water feed is typically on the right hand side and the hot feed on the left.
If a tap has two handles, it will require either a pair of quarter turn valves or two wind-down (compression) valves. On the other hand, a tap with a single handle will need a ceramic disk cartridge.
TapMedic-an Universal alternative
For professional maintenance, Plumbers and competent DIY'ers, we recommend TapMedic a incredibly useful and adaptable kit that allows you to replicate your worn out cartridge easily on site using just the kit provided!
Never have to leave the site again hunting for the right cartridge at merchants and save yourself time!
WRAS Approved Cartridges with over 4000 possible combinations
Tap Medic can be incredibly useful if the cartridge your looking for is out of production
.png)
Visit www.Tapmedic.co.uk to find out more!